Redemac Autolabel D43, Руководство пользователя

Страница: 12 / 38

3. Press ”ONLINE”. The applicator will be ready to receive a label.
4. The machine is now ready to be trigged automatically using the photo sensor or manually by
pressing ”Test Print” on the touchscreen.
2.3 Updating Articles and Label Layouts
Please see chapters 5 and 6 for detailed information on how to change the articles in the internal
database and change or create new labels.
2.4 Machine Settings ”Settings”
There are a number of operator settings in the machine. They may vary slightly depending on the
specific factory configuration of your particular machine.
The settings can be found under the ”Settings” tab on the touch screen. A password is usually
required to view and change the settings.
2.4.1 System Password
The default system password is ”4113”.
2.4.2 Settings->Overview
In this screen you can view the system information, and also perform an application restart.
It is also possible to perform system maintenance (application upgrades, etc) by running scripts
supplied by Autolabel on an external USB flash drive attached to the control box. It is also possible
to see the internal air pressure. The pressure is measured after the internal regulator. Normal air
pressure is 5.0-5,8 bar.
2.4.3 Settings->Printer
In this screen you can set the machine orientation to get the proper rotation of your labels. The labels
are always designed ”upright” in the layout design program, and then rotated as needed in this screen.
(The ”Print Quality Options” are disabled in this configuration, and can instead be changed on
the ”Settings->Adjust” screen.)
The printhead temperature can also be monitored. It shall normally be slightly above the surrounding
temeratureon idle. During production it shall not exceed 70
°C.
2.4.4 Settings->Timing
In this screen you can set various machine timing parameters that normally has effect on the
placement of the label on the marking object.
2.4.4.1 ”Conveyor speed”
The conveyor speed does not affect the actual conveyor speed, instead it is used as a tool to see the
relationship between time and distance on the conveyor belt. When this setting is changed, it will affect
all the other timing settings, so it is easiest to set it first before the other timing settings.
2.4.4.2 ”Window start”
This setting has effect on how long time that must pass from a weight arrives from the scale to the
trigger signal is allowed to arrive. The setting is only active when ”trig type” is set to 0 or 1. Those trig
types are used when the printer is connected tro a scale.
12
www.redemac.com 888-335-9570