Redemac Autolabel D43, Руководство пользователя

Страница: 11 / 38

(5) Inner Paper Guide
(6) Outer Paper Guide
(7) Label Roll
The figure on the right above illustrates how the paper shall be threaded through the machine.
Follow these steps to remove an installed roll of label paper:
A. Press the Rewinder Pinch Release (4). This collapses the rewinder paper diameter so that it is
easy to remove the old paper.
B. Remove the old paper from the Rewinder Roll (3). Clean the Rewinder Roll so that it is free
from label residue.
C. Remove the Outer Paper Guide (6)
D. Open the Printhead Handle (1)
E. Remove old label paper from the Label Roll (7)
Follow these steps to load a new roll of labels:
A. First follow the steps above to remove an existing label roll. The Printhead Handle shall be in
the open position, and the Outer Paper Guide shall be removed.
B. Change the Label Paper Width if needed, see section 2.1.4 for details.
C. Fit the new roll of labels to the Label Roll (7).
D. Attach the Outer Paper Guide (6). It shall be pressed against the label roll for a snug fit to
ensure minimum paper movement through the machine.
E. Pull/guide the paper around the flexible roller and up between the print roller and the open
applicator (see the threading illustration in the diagram above for details).
F. Pull about 50 cm of paper in front of the machine.
G. Pull/guide the paper back to the Rewinder Roll (3) and attach the end to one of the Rewinder
Paper Pinches (2). The paper end should be double folder for a secure attachment in the
pinch.
H. Close the Printhead handle (1) to the the closed position.
I.
The machine will now automatically adjust the paper so that the media sensor is adjusted and
the label paper is positioned for a new printout.
2.2 Test Print and Apply
Follow these steps to print and apply a label:
1. Turn on the power and wait until the screen indicates ”OFFLINE”.
2. Press ”Products” on the touchscreen and select any product.
11
www.redemac.com 888-335-9570