Redemac Autolabel D43, Руководство пользователя

Страница: 14 / 38

2.4.5.6 ”Fan speed”
Unit: %. Used for “fan-type” blow applicators to control the label holder fan speed. A lower setting can
be desired for large labels so that they do not stick to the grille, while a higher setting can be used for
very small labels to secure them to the grille during the application process. Common values are 40 –
60%.
2.4.5.7 ”Blow time”
Unit: ms. Blow applicator blow time in milliseconds. Normally fixed at 80, does not need to be
adjusted.
2.4.5.8 ”Trig type”
This setting defines how the printer manages the trig sequence. Roughly it defines if a scale shall be
used. Three settings are describes below:
0:
Scale is used. No trigger is used. Incoming scale value starts print and apply.
1: Scale is used. One trigger starts print and apply.
2: No scale is used. One trigger starts print and apply.
2.4.5.9 ”Trig polarity”
Sets the hardware trigger polarity in order to set the label placement on the product relative to either
the product start (positive flank) or end (negative flank).
2.4.5.10 ”Scale type”
Sets the scale type if used.
2.4.5.11 ”Righter time”
Only for systems with a righter. Sets for how long the product shall be held still by the righter.
2.4.5.12 ”Apply test prints”
Test print labels can either be applied, or left in the unapplied position on the applicator grille. The
latter may be useful when changing the blow applicator screw setting.
2.4.5.13 ”Check max weigh”
For systems with external weighing equipment, this determines whether the product weights should be
checked against the limits in the article database.
2.4.5.14 ”Check min weigh”
For systems with external weighing equipment, this determines whether the product weights should be
checked against the limits in the article database.
2.4.5.15 ”Render side position”
This can be used to move the printout on the label, but should normally not be needed.
2.4.5.16 ”Render top position”
This can be used to move the printout on the label, but should normally not be needed.
2.4.6 ”Settings->Network”
14
www.redemac.com 888-335-9570