SunRise 3ph NS – Installation Manual
SunRise 3ph NS Install Version 1.0
Page 5 of 32
Issue Date 14/08/2022
Dimensions and clearance/positioning information
Model numbers:
There are 6 model numbers based on the number of batteries installed in the 3-phase SunRise
system.
SRS-300 NS (no batteries)
SRS-318 NS (x5 batteries = 17.75kWh nominal. The minimum sized battery if you have one)
SRS-321 NS (x6 batteries = 21.3kWh nominal)
SRS-325 NS (x7 batteries = 24.85kWh nominal. The minimum for full 10kW backup power)
SRS-328 NS (x8 batteries = 28.4kWh nominal
SRS-332 NS (x9 batteries = 31.95kWh nominal. The max. number of batteries available)
SunRise Weight, size and IP rating:
414kg with 9x Lithium batteries
(32kg per battery)
126kg complete without batteries
99kg complete without batteries
and inverter
Dimensions: 1050 H x 1322 W x 537 D
[mm]
IP rating: IP43
Positioning information summary:
Minimum Clearance around SunRise
where no windows doors etc are
allowed. According to AS/NZS 5139.
Note: if the system is >300mm off the
wall then this does not apply.
The Sunrise is rated for the following
Environmental Condition – Rated
maximum ambient operating
temperature 50degC for outdoor
unconditioned without solar effects.
According to AS4777.2:2020.
This means the SunRise system must be
installed in a shaded area.
