SunRise 3ph NS – Installation Manual
SunRise 3ph NS Install Version 1.0
Page 7 of 32
Issue Date 14/08/2022
Components
O
PENING THE
S
UN
R
ISE
RedEarth’s SunRise Home Battery System can be internally
accessed by removing the lid. To do this, remove the nine
(9) screws with a Philips screwdriver (PH2), lift and pull the
cover away from the unit and place in a safe location.
I
NSIDE
L
AYOUT
The SunRise is divided into three main areas. On the Lefthand
side (LHS) is the Inverter, in the middle are the batteries and the
Battery Management Unit (BMU) and on the Righthand Side
(RHS) are the electrical components and cable connection points
for installation. Prior to leaving the factory the system is tested.
It leaves the factory with the inverter and BMU cabling fully
connected and ready-to-run. The batteries are usually removed
for transportation.
Removal of the cover must only be done by qualified
personnel.
