SunRise 3ph NS – Installation Manual
SunRise 3ph NS Install Version 1.0
Page 2 of 32
Issue Date 14/08/2022
Safety
Wiring diagrams and installation instructions are given as a guide only and compliance to
appropriate standards is the responsibility of the installer. Relevant standards are listed below:
AS/NZS 3000:2018
Wiring rules
AS/NZS 5033:2021 (and 1&2)
Installation and safety requirements for photovoltaic (PV) arrays
AS/NZS 4509.2:2012
Stand-alone power systems-Design
AS/NZS 1170.2:2011
Structural design actions-Wind actions
AS/NZS1768:2007
Lightning protection
AS/NZS 3008.1.1:2017
Electrical installations – Selection of cables
AS4777.2:2020 + Amd1
Grid connection of energy systems via inverters
AS/NZS 5139:2019
Electrical installations-Safety of battery systems for use with power
conversion equipment
The SunRise must only be installed by suitably qualified personnel who have read and are
familiar with its operation and hazards.
The battery provided with this system must be charged only by the Sungrow inverter. Do
not attempt to charge the batteries with any other charger device or connect any devices
directly to the DC battery bus unless approved by RedEarth.
In the event of a fire evacuate the area and call emergency services. A dry agent fire
extinguisher should be readily available and used. DO NOT use water.
MSDS document is provided with the system and can be found at
www.redearth.energy
Do not use a damaged battery. Batteries should only be disposed of at an appropriate
recycling centre. Please contact RedEarth for advice.
A battery can present a risk of electrical shock and high short-circuit current. The
following precautions should be observed when working on batteries:
Remove watches, rings, and other metal objects.
Use tools with insulated handles.
Disconnect charging source prior to connecting or disconnecting battery
terminals.
In our efforts towards constant product enhancement, this document is subject to
change at any time. Please visit
http://www.redearth.energy
and download the
appropriate and latest version manual.
Symbol
Explanation
Refer to the operating instructions
Indicates additional information, emphasized contents or tips that may be
helpful.
Caution, risk of electric shock.
Caution, risk of danger.
Do not touch live parts until 10 minutes after disconnection from the power
sources.
