background image

Power Builder

TM

Battery Charger

instructions, 5 & 10 unit

The warranties made by MSA with respect to the product are voided if
the product is not assembled, used, and serviced according to the
instructions in this manual. Please protect yourself and your employees
by following the instructions. Please read and observe the WARNINGS
and CAUTIONS inside. We encourage our customers to write or call for
a demonstration of this equipment prior to use, or for any additional
information relative to use or repairs.

Call 1-800-MSA-2222 during regular working hours.

This manual, including Warnings and Cautions inside, must be read and followed
carefully by all persons who will use or maintain the product, including those
who have any responsibility involving its selection, application, service, or
repair. This product will perform as designed only if used and maintained
according to the instructions. Otherwise, it could fail to perform as designed,
and persons who rely on this product could sustain serious personal injury or
death.

TAL 201 (L) Rev. 1

© MSA 2002

Prnt. Spec. 10000005389 (C) Mat. 10002461

Doc. 10000000241

part no.

10002460 - 5 unit

.

10002439 - 10 unit

.

Содержание Power Builder 10002460







Отзывы: