RedbacK Racing SPIDER 1s, Руководство по эксплуатации

Страница: 18 / 23

This program calls back the data that was stored in ‘Save Data’ program. To load
the data, press Start/Enter key once to begin blinking and select the number using
INC or DEC key then press Start/Enter key for more than 3 seconds.
This screen represents the specification of the battery.
The following screens will automatically display battery type
you set up. This example shows a NiMH battery pack, with
12 cells (12*1.2v:14.4v) and a capacity of 3000mAh.
Setting up the charge current for manual charge mode, or
the current limit for automatic charge mode. Each mode
can be switched by pressing INC and DEC button at the
same time when the current field is blinking.
Setting up discharge current and final voltage.
Setting up the sequence of charge and discharge, and
the cycling number
Saving data.
Program select
Select the data number to be loaded.
Loading data.