RedbacK Racing SPIDER 1s, Руководство по эксплуатации

Страница: 15 / 23

-
13
-
7. NiMH/NiCd battery program
These programs are for charging or discharging NiMH (Nickel-Metal-Hydride) or
NiCd (Nickel-Cadmium) battery commonly used for R/C model applications. To alter
the value, press
Start/Enter key to make it blink then change the value using the INC
Start/Enter key once.
To start the process, press Start/ Enter button for more than 3 seconds.
7.1 Charging NiCd/NiMH battery
This program simply charges the battery using the
current you set. In 'Aut' mode, you need to set the
upper limit of charge current to avoid over charging
the battery. In 'Man' mode, you can charge the battery
with the charge current you set.
Each mode can be switched by pressing
INC and DEC button simultaneously when the current
field is blinking.
The screen displays the current state of charging . To
stop the process, press Batt type/Stop key once.
The audible sound indicates the end of the process.
7.2 Discharging NiCd/NiMH battery
Set discharge current on the left and
final voltage on
the right. The discharge current ranges from 0.1 to 1.0A
and the final voltage ranges from 0.1 to 25.0V. To
start the process, press
Start /Enter key more than 3
seconds.
This screen displays the current state of discharge. You
can alter the discharge current by pressing Start/Enter
key during the process. Once you change the current
value, store it by pressing
Start/Enter button again.
To stop discharging press Batt type/Stop key once.
The audible sound indicated the end of the process.
or DEC key. To store the value press