red
PRACTIKA 28-33
USE AND INSTALLATION MANUAL
Chapter 7
page 36
Installation of boiler components
Technical dept. - All rights reserved - Reproduction prohibited
7.2.
Installing the two ceramic plates in the boiler combustion chamber
Fit the two ceramic plates in the boiler combustion chamber - they will guide the combustion gases and
allow for an efficient combustion process (
these plates are wrapped and placed in the ash tray for
transport).
Figure 7.1.2 Side view of the pellet burner,
fitted onto the boiler heat exchanger.
Figure 7.2.1 The ceramic elements are installed in the combustion
chamber of the hot water boiler (they are placed on support plates and
secured in place with special welding).
