red
PRACTIKA 28-33
USE AND INSTALLATION MANUAL
Chapter
12
page 62
Cleaning and maintenance
Technical dept. - All rights reserved - Reproduction prohibited
Figure 12.3.1
Removing the ash tray from the combustion chamber and cleaning it.
Open the combustion chamber flap and remove the ash tray, situated at the bottom of the boiler, where the
ash residue is collected. Pour the ash residue into the heat-resistant container (or another suitable
container), reposition the ash tray, close the flap, also check the position and seal of the top cover of the
heat exchanger.
CAUTION
:
regular removal of any ash residue deposited on the heat exchange surfaces of the boiler
ensures prolonged and reliable operation, as well as efficient and economical
performance of the appliance.
