RED LOTUS HYDRO Скачать руководство пользователя страница 58

Страница: 58 / 72

9-SAFETY DEVICES AND ALARMS

TAMPERING WITH THE SAFETY DEVICES IS PROHIBITED

If the product is NOT used as described in this instruction manual, the manufacturer declines all liability for any

damage caused to persons and property. The manufacturer furthermore refuses to accept responsibility for damage

to persons and property arising from the failure to observe all the rules contained in the manual and in particular:

• All the necessary measures and/or precautions must be adopted when performing maintenance, cleaning and

repairs.

• Do not tamper with the safety devices.

• Do not remove the safety devices.

• Connect the product to an efficient smoke expulsion system.

• Verify that the room in which the appliance will be installed is adequately ventilated.

The product can be started-up and the automatic function of the probe restored only after having eliminated the

cause that triggered the safety system. This manual will help you understand which anomaly has occurred, and

explain how to intervene according to the alarm message displayed on the appliance.

Содержание LOTUS HYDRO







































































Результаты поиска

Содержание LOTUS HYDRO

Отзывы:

Похожие инструкции для LOTUS HYDRO

Бренды по названию

Популярные бренды

RED LOTUS HYDRO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание LOTUS HYDRO

Отзывы:

Похожие инструкции для LOTUS HYDRO

Бренды по названию

Популярные бренды