RED LOTUS HYDRO Скачать руководство пользователя страница 42

Страница: 42 / 72

8-MENU ITEMS AND OPERATION

• Press "menu" to confirm.

• Select "Enable" with the + - keys.

• Press "menu" to confirm and "esc" to exit.

d - Tones

This function is disabled by default, so to enable act as follows:

• Press the “menu” button.

• Scroll to "Settings" using the arrows

• Press "menu" to confirm.

• Scroll to "tones" using the arrows.

• Press "menu" to confirm.

• Select "On" with the + - keys.

• Press "menu" to confirm and "esc" to exit.

e - External thermostat (see relative chapter)

EXTERNAL THERMOSTAT (not included with the boiler, to be provided by the user)

The temperature of the stove can also be controlled by an external room thermostat. It is located in a central position of the room where

the stove is installed. It provides a closer match between the heating temperature requested of the stove and what it actually provides.

POS.1-2 EXTERNAL THERMOSTAT

POS.8 THREE-WAY VALVE NEUTRAL

POS.3-4 PUFFER/BOILER PROBE

POS.9 THREE-WAY VALVE NEUTRAL (domestic)

POS.5 EARTHING

POS.10 THREE-WAY VALVE NEUTRAL (heating)

POS.6-7 ADDITIONAL BOILER (MAX 100 mA)

(*) DISCONNECT INTERNAL THREE-WAY VALVE AND FLOW

SWITCH

Содержание LOTUS HYDRO







































































Результаты поиска

Содержание LOTUS HYDRO

Отзывы:

Похожие инструкции для LOTUS HYDRO

Бренды по названию

Популярные бренды

RED LOTUS HYDRO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание LOTUS HYDRO

Отзывы:

Похожие инструкции для LOTUS HYDRO

Бренды по названию

Популярные бренды