A
27
19-CLEANING AND MAINTENANCE
Technical Dept. - All rights reserved - Reproduction prohibited
CLEANING THE GLASS
It is recommended to clean the ceramic glass with a dry brush, or if it is very dirty, spray a little specific detergent and clean with a cloth.
ATTENTION!
Do not use abrasive products and do not spray the glass cleaning product on the painted parts and on the door
gaskets (ceramic fibre cord).
CLEAN THE EXCHANGER AND THE COMPARTMENT BENEATH THE BRAZIER EVERY 2/3 DAYS
Cleaning the exchanger and the compartment beneath the brazier is a simple operation but very important if the boiler is to maintain
optimal performance.
We therefore recommend cleaning the internal exchanger every 2-3 days, performing these simple operations in sequence:
•
Activate the “CLEANING” function
- with the boiler off press - menu, select “Settings”, with the arrows <> select “Cleaning”,
confirm with the “Menu” key, activate the cleaning “ON” with the + - keys. This procedure starts the smoke extractor on the maximum
setting to expel the soot that becomes dislodged when the exchanger is cleaned.
•
Clean the pipe unit
- Using lever “A” located under the tank cover, vigorously shake the turbulators 5-6 times. This will remove
any soot that has deposited in the exchanger’s smoke ducts during normal stove operation. The accumulated ash will settle in the
compartment under the ash pan, this is why we recommend cleaning when emptying the ash pan so, using a vacuum cleaner, also
vacuum the lower compartment “
Q
.
•
Deactivate the “CLEANING” function
- this function is deactivated automatically after two minutes. If you need to stop the
function sooner, press the “Esc” key.
•
Clean the pipe units (see next page)
•
Empty ash pan “D”.
•
Clean the smoke extractor compartment (see next page)
• When done cleaning, close the cover and ash tray.
If cleaning is not done every 2-3 days, the boiler could go into alarm
caused by ash clogging after several hours of operation.
