F
G
D
H
Q
B
C
26
19-CLEANING AND MAINTENANCE
Only by properly servicing and cleaning the product is it possible to ensure its safety and correct operation.
ATTENTION!
All the cleaning operations of all parts must be performed with the product completely cold and the plug
disconnected.
Disconnect the product from the 230V power supply before performing any maintenance operations.
The product requires little maintenance if used with certified good quality pellets.
DAILY OR WEEKLY CLEANING PERFORMED BY THE USER
Cleaning the brazier and the ash pan
Lift part “C” from its place and remove brazier “B”. Use the vacuum nozzle to clean away any ash from the area under the brazier. We
recommend performing this operation every 2-3 days depending on what type of pellet is being used.
Open door “G” and turn the handle of door “H” to the right and open it downwards.
Remove and empty ash pan “D”. Wipe away any residual ash before reinserting the pan. Your experience and the quality of the pellets will
determine the ash pan cleaning frequency. However, it is recommended not to exceed 7 days. After removing and emptying the ash pan
“
D
” also clean the lower part of the compartment (see arrow “
Q
”).
Attention! When cleaning is completed, remember to put part “C”, brazier “B” and ash pan “D” back in place and close all
the doors (“G”, “H”, “F”)back up again.
EXAMPLE OF A CLEAN BRAZIER
EXAMPLE OF A DIRTY BRAZIER
