background image

red

 

COMPACT 24 BOILER 

Chapter  

9

USE AND MAINTENANCE MANUAL 

page

 42  

 

Programming and settings 

    Technical dept. - All rights reserved - Reproduction prohibited 

 

 (increase) or 

 (decrease) keys, set the boiler 

switch-off time

 for 

this programme. Each time the key is pressed, the time increases or 

decreases by 10 minutes. Hold the key down to speed up the increase 

or decrease progressively, so that you can make a large modification 
quickly. Once the desired time has been set, store it by pressing the 

 

key, which automatically takes you to subsequent step 

UT 07. 

 

PROGRAMME 1

: setting the 

ON or OFF days. 

We are at step 

UT 07. The boiler display 

(8)

 alternates the 

abbreviations 

UT 07 and any one of: ON 1, OFF 1, ON 2, OFF 2, ON 3, 

OFF 3, ON 4, OFF 4, ON 5, OFF 5, ON 6, OFF 6, ON 7, OFF 7, where 

the digits refer to the day of the week (see table), ON means 

"ENABLED" and OFF means "DISABLED". In step 

UT 07, the 

 key 

scrolls through the day reference number, whereas the 

 key enables 

them, or disables them. The days are then scrolled with the 

 key and, 

for each day, use the 

 key to decide whether it should be ON or OFF. 

Once the setting has been made, it is stored by pressing the 

 key to 

move on automatically to step 

UT 08. 

 

Corresponds to a 

MONDAY

 

Corresponds to a 

TUESDAY

 

Corresponds to a 

WEDNESDAY

 

Corresponds to a 

THURSDAY

 

Corresponds to a 

FRIDAY

 

Corresponds to a 

SATURDAY

 

Corresponds to a 

SUNDAY

 

 

For example

. Once the boiler switch-on (at 7:30) and switch-off (at 

9:30) times of programme 1 have been set, you will have reached step 

UT 07. You want to programme the boiler so that it performs this 

programme on Monday, Wednesday and Friday.  

 

 

Press the 

 key in sequence to reach position ON 1, or OFF 1. If 

you see ON 1, then do nothing, but if you see OFF 1, press the 

 

key to read ON 1 (Monday ON).  

 

Now press the 

 key once to go to position ON 2, or OFF 2 and 

press the 

 key again (or not) to read OFF 2 (Tuesday OFF). 

 

Press the 

 key once to go to position ON 3, or OFF 3 and then 

press the 

 key (or not) to read ON 3 (Wednesday ON). 

 

Press the 

 key once to go to position ON 4, or OFF 4 and then 

press the 

 key (or not) to read OFF 4 (Thursday OFF). 

 

Press the 

 key once to go to position ON 5, or OFF 5 and then 

press the 

 key (or not) to read ON 5 (Friday ON). 

 

Press the 

 key once to go to position ON 6, or OFF 6 and then 

press the 

 key (or not) to read OFF 6 (Saturday OFF). 

 

Press the 

 key once to go to position ON 7, or OFF 7 and then 

press the 

 key (or not) to read OFF 7 (Sunday OFF). 

 

Lastly, press the 

 key to store the entire enabling set-up of 

programme 1 and automatically move on to step 

UT 08, i.e. to 

enter 

PROGRAMME 2. 

 

PROGRAMME 2 

Abbreviation on the 

display (8) 

UT 08 

UT 09 

UT 10 

Data to enter 

Switch-on 

Time 

Switch-off 

Time 

Days ON or OFF 

On/Off 1,2,3,4,5,6,7

Содержание COMPACT 24





























































Отзывы: