STORE IN EXISTING PROGRAM:
STORE IN ANOTHER PROGRAM:
If you want to store the new settings, they can be saved into the current
program whereby any previous settings will be overwritten. To store the new settings simply press the EDIT [SAVE]
button once, as shown below:
The main display will show 'SAVE' whilst the store operation is carried out.
If you want to keep the existing program
the edited setup, you
can overwrite any of the other programs. First, activate COMPARE mode and then use the [VOICE /PROGRAM]
jog dial to select another suitable program location as shown below:
and still save
The 64 factory presets can be re-loaded back into memory at any time.
Press and
the
[VOICE/PROGRAM] jog dial knob and then turn power on. The main display will show ‘SURE’ to prompt
confirmation of the load. Press the top [EDIT] button marked ‘VALUE +’’ to confirm the operation (‘LOAD’ appears
briefly in display).
RE-LOAD ALL 64 FACTORY PRESETS: Ensure power is switched OFF.
hold down
PART MENU FUNCTIONS
The [PART] menu button at the front of the main panel lets you setup parameters such as POLYPHONY, MIDI
CHANNEL, NOTE RANGE, TRANSPOSE etc for each sound. For full details on the menu list, functions and
settings please see pages 22, 23 and 24.
Loading back all 64 factory presets
PARAMETER
VALUE
PARAMETER
VALUE
Press the save [SAVE]
button once to store the
edited sound
Display changes to confirm
SAVE operation
MENU
VALUE
VALUE
EDIT
save
COMP
OWNERS MANUAL
9
PA
G
E
Operation
PARAMETER
VALUE
Rotate to select new PROGRAM
When you are sure you want to overwrite the
selected program press SAVE
1
3
2
4
Press the COMPARE button once
Display ‘C’ letter now flashes to indicate
COMPARE SELECT mode
VOICE/
PROGRAM
[+/up]
[-/dwn]
MENU
MENU
VALUE
VALUE
VALUE
VALUE
EDIT
EDIT
save
save
COMP
COMP
