Use the menu [EDIT VALUE + or VALUE -] button to change the setting, as shown in the following example:
If there is no conversion kit EPROM installed the display will show ‘nonE’ when an attempt is made to load the
application as above.
This function allows you to alter the speed of the chorus effect (as setup in the PART menu). Use the menu [EDIT -
MENU UP] button to select this feature.
The selections are:
When set to [0] the chorus effect speed will be at its minimum. When set to [15] the chorus effect
speed will be at its maximum.
Use the menu [EDIT VALUE + or VALUE -] button to change the setting, as shown in the following example:
This function allows you to alter the depth of the chorus effect (as setup in the PART menu). Use the menu [EDIT -
MENU UP] button to select this feature.
The selections are:
When set to [0] the chorus effect depth will be at its minimum. When set to [15] the chorus effect depth
will be at its maximum.
Use the menu [EDIT VALUE + or VALUE -] button to change the setting, as shown in the following example:
[0] to [15]:
[0] to [15]:
UTILITY 10: CHORUS RATE
UTILITY 11: CHORUS DEPTH
With utility mode ‘10’ selected, the display will alternate between:
With utility mode ‘11’ selected, the display will alternate between:
PARAMETER
VALUE
New setting = VOCODA
(only if the conversion EPROM
has been installed)
MENU
VALUE
VALUE
EDIT
save
COMP
OSCILLATORS
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
Display alternates
between
Display alternates
between
Current setting = Rate is 2
Current setting = Depth is 2
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
New setting = Rate is 15 (max)
New setting = Depth is 13
MENU
MENU
VALUE
VALUE
VALUE
VALUE
EDIT
EDIT
save
save
COMP
COMP
OSCILLATORS
OSCILLATORS
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
34
PA
G
E
DARKSTAR XP2 - Poly Synth
Operation
