Red Sound Systems Ltd
MIDI
EXT IN 1 & 2
MAIN OUTPUTS
SUB OUTPUTS
PHONES
MADE IN ENGLAND
POWER
9v DC
OFF
ON
CAUTION: DO NOT OPEN CASE. REFER TO QUALIFIED SERVICE PERSONNEL. NO USER SERVICEABLE PARTS INSIDE
www.redsound.com
XP2
Red Sound
the colour of music
RIGHT [2]
[2]
LEFT [1]
TIP[1] RING[2]
THRU
OUT
IN
[1]
+
-
1
4
2
3
5
6
7
1.
2.
3.
4.
5.
6.
7.
HEADPHONES - 1/4 jack connector
SUB OUTPUTS - 1/4 jack connectors
MAIN OUTPUTS - 1/4 jack connectors
EXTERNAL INPUTS 1&2 - 1/4 jack connector
MIDI IN/OUT/THRU - Connectors
POWER - Switch
DC POWER IN - Connector
Use this socket to monitor the MAIN output signal from DARKSTAR XP2. Use suitable stereo headphones of
50 ohms > impedance (NOTE: the SUB outputs cannot be monitored from this connector).
Use these sockets to feed the secondary pair of audio outputs to your mixing desk or amplification system.
Use these sockets to feed the main left/right audio output of DARKSTAR XP2 to your mixing desk or amplification
system.
Use this socket to connect any external line level audio source to DARKSTAR XP2 for filter/envelope processing
whilst using MIDI control.
MIDI data will be transmitted and received by these connectors.
This turns the power on and off.
Only use the 9vDC 500 mA [or greater amperage] PSU supplied with DARKSTAR XP2 to power the unit.
4
PA
G
E
Rear Panel
DARKSTAR XP2 - Poly Synth
