PROGRAMS - Selecting, editing and saving sounds
This section allows you to store all the DARKSTAR XP2 settings in memory for instant recall of your favourite
sounds. The position of every control knob, switch and even the joystick can be memorised in 64 user definable
program memory locations.
Use the [VOICE/PROGRAM] jog dial to select programs from memory, as shown in the
following example:
To edit the selected program simply adjust any of the front panel controls. When the first control or switch
is moved, the [EDIT] indicator will start to flash to indicate ‘EDIT’ mode, as shown in the following example:
If you
want to keep the parameter changes made during editing, simply select another program.
SELECTING PROGRAMS:
EDITING:
COMPARE:
don’t
To hear the ORIGINAL settings of the selected program (before it was edited), press the EDIT -
[COMP] button once, as shown below:
You can switch from ‘Edit’ to ‘Compare’ modes as often as you like, simply press the [COMP] button again to jump
from one mode to the other.
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
PARAMETER
VALUE
EDIT
Rotate clockwise or anti-clockwise to change PROGRAM
1
3
2
Display shows current PROGRAM number
Display flashes ‘PL’ to indicate
PROGRAM LOADING
...then ‘P 7’ as the new
PROGRAM is loaded in
Flashes to indicate program EDIT mode
VOICE/
PROGRAM
[+/up]
[-/dwn]
Press the compare [COMP]
button to hear the original
sound
Display changes to ‘C’
to indicate COMPARE mode
MENU
VALUE
VALUE
EDIT
save
COMP
8
PA
G
E
Operation
DARKSTAR XP2 - Poly Synth
