N-Tron® 300 Series Hardware Guide
2-5
Installation
Revised 2015-12-04
Section 2 Installation
Introduction
This section contains the information and procedures necessary to unpack, inspect, install and connect the N-Tron
300 series models.
Unpacking
Remove all the equipment from the packaging, and store the packaging in a safe place or dispose according to
your standard operating procedure.
Inspection
Please ensure the shipping package contains the following items in undamaged condition:
1.
300 series unit
2.
N-Tron product CD
If the package contents are damaged:
1.
Contact your carrier.
2.
File any damage claims with the carrier.
Installing/Mounting
Read the following warning before beginning the installation:
Lire l'avertissement suivant avant de commencer l'installation:
WARNING:
Never install or work on electrical equipment or cabling during periods of lightning
activity. Never connect or disconnect power when hazardous gases are present.
AVERTISSEMENT:
Ne jamais installer ou de travailler sur un équipement électrique ou de
câblage pendant les périodes d'activité de la foudre. Ne jamais brancher ou débrancher l'alimen-
tation en gaz dangereux sont présents.
CAUTION (Only for FXE products):
CLASS 1 LASER PRODUCT. Do not stare into the laser.
ATTENTION (Uniquement pour les produits FXE):
PRODUIT LASER CLASSE 1. Ne pas
regarder dans le laser.
