Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Справочное руководство

Страница: 280 / 318

Appendix D. Probes
268
Field Value
Critical Maximum Number Running
Critical Minimum Number Running
Table D.25. Linux::Process Running settings
D.5.12. Linux::Swap Usage
The Linux::Swap Usage probe monitors the swap partitions running on a system and reports the
following metric:
• Swap Free — The percent of swap memory currently free.
Requirements
— The Red Hat Network Monitoring Daemon (
rhnmd
) must be running on the
monitored system to execute this probe.
Field Value
Timeout* 15
Warning Minimum Swap Free
Critical Minimum Swap Free
Table D.26. Linux::Swap Usage settings
D.5.13. Linux::TCP Connections by State
The Linux::TCP Connections by State probe identifies the total number of TCP connections, as well as
the quantity of each in the following states:
• TIME_WAIT — The socket is waiting after close for remote shutdown transmission so it may handle
packets still in the network.
• CLOSE_WAIT — The remote side has been shut down and is now waiting for the socket to close.
• FIN_WAIT — The socket is closed, and the connection is now shutting down.
• ESTABLISHED — The socket has a connection established.
• SYN_RCVD — The connection request has been received from the network.
This probe can be helpful in finding and isolating network traffic to specific IP addresses or examining
network connections into the monitored system.
The filter parameters for the probe let you narrow the probe's scope. This probe uses the
netstat
-ant
command to retrieve data. The
Local IP address
and
Local port
parameters use values in
the
Local Address
column of the output; the
Remote IP address
and
Remote port
parameters use
values in the
Foreign Address
column of the output for reporting.
Requirements
— The Red Hat Network Monitoring Daemon (
rhnmd
) must be running on the
monitored system to execute this probe.
Field Value
Local IP address filter pattern list
Local port number filter