Cambridge Audio December 2006
1
18
th
December 2006
AP20960/2
How to Burn an ISO Image File
onto a CD Instructions
Cambridge Audio
Gallery Court
Hankey Place
London SE1 4BB
England
www.cambridge-audio.com
Introduction
The 640H software file on our website is in the form of an ISO Image file. This single
file contains all the files required to update your 640H. It is similar to a ZIP or RAR
compressed file except that an ISO image file is specifically for CD burning.
To create your 640H CD we recommend you use one of the following programs: “Nero”
or “ISO recorder” for PC’s, and “Disk Utility” or “Roxio Toast Titanium” (Toast for short)
for Mac’s. We will now show you how to create a CD using the above software.
Nero 6 for PC’s
1.
Start “Nero Express,” via your Windows Start Button and Programs.
2.
When the “Nero Express” window has appeared, select the CD recorder you
would like to use. This is done via the drop down menu found at the top right
hand corner of the Nero window.
3.
Now select the “Disc Image or Saved Project” button.
4.
A new window will now appear asking you to locate the ISO file that you
would like to burn to CD. Locate the file, select it and press the “Open”
button.
5.
In the window that now appears make sure the correct CD recorder is
selected and a blank CD is placed in the recorder. Select a writing speed for
the CD and leave the “Number of Copies” as 1.
6.
Make sure the “Verify data on disc after burning” box is ticked. This makes
sure that the ISO image is burnt on to the CD successfully.
7.
Now click the “Next” button.
8.
The burning and data verification processes will now begin. Nero will
constantly show the current process it is carrying out.
9.
If there are any pauses during the burning process, then please do not stop
the process as this is common. Only abort the process if the pause is more
than 5 minutes long.
10.
If there are any errors during writing, Nero will display an error message. If
this occurs, make sure you have downloaded the full ISO file, and the CD is
blank. If the error reoccurs, there may be a fault with your CD recorder.
Consult professional help for more assistance.
11.
The process is complete when the “Data verification completed successfully”
window appears.
12.
Press OK, and then press “Next” in the next window.
13.
This will then eject the CD.
