Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Справочное руководство, Страница: 99 / 318

System Groups —
87
then use the
System Set Manager
to perform actions on them simultaneously. It is possible
to select only those systems that are members of all of the selected groups, excluding those
systems that belong only to one or some of the selected groups. To do so, select them and
click the
Work with Intersection
button. To add all systems in all selected groups, select
them and click the
Work with Union
button. Each system will show up once, regardless of
the number of groups to which it belongs. Refer to
Section 7.4.4, “System Set Manager —
”
for details.
•
Updates
— Shows which type of Errata Alerts are applicable to the group or confirms
that it is up-to-date. Clicking on a group's status icon takes you to the
Errata
tab of
its
System Group Details
page. Refer to
Section 7.4.3.3, “System Group Details —
”
for more information.
The status icons call for differing degrees of attention:
•
— All systems within group are up-to-date
•
— Critical Errata available, update
strongly
recommended
•
— Updates available and recommended
•
Group Name
— The name of the group as configured during its creation. The
name should be explicit enough to easily differentiate between it and other
groups. Clicking on the name of a group takes you to
Details
tab of its
System
Group Details
page. Refer to
Section 7.4.3.3, “System Group Details —
”
for more information.
•
Systems
— Total number of systems contained by the group. Clicking on
the number takes you to the
Systems
tab of the
System Group Details
page for the group. Refer to
Section 7.4.3.3, “System Group Details —
”
for more information.
•
Use in SSM
— Clicking the
Use Group
button in this column loads the group from that row and
launches the
System Set Manager
immediately. Refer to
Section 7.4.4, “System Set Manager —
”
for more information.