Recognition Systems HandPunch 50E, Руководство пользователя

Страница: 38 / 58

Programming the HandPunch
Page 36
Set Lan-
guage The Set Language command allows the language shown on the
HandPunch’s display to be “localized” for a variety of countries.
- English - German
- Japanese - Russian
- French - Indonesian
- Italian - Portuguese
- Spanish - Polish
Set Date
Format The Set Date Format command allows the date format shown on the
HandPunch’s display to be “localized” for a variety of countries.
- mm/dd/yy - mm-dd-yy
- dd-MMM-yy - MMM dd,yy
- dd-mm-yy - ddMMMyyyy
- dd/mm/yy
Set Time
and Date The Set Time and Date command allows the HandPunch’s time and
date to be set. This is normally not necessary as the HandPunch’s time
and date are set by the host computer.
Set ID
Length The Set ID Length command allows you to reduce the number of
keystrokes required to enter the ID number by eliminating the use of the
key to complete an ID number entry. Once the ID Length is
set, the HandPunch will automatically accept an ID number entry once
the correct number of characters have been entered.
Once the ID Length is set, the T & A Mode Set command appears,
allowing you to configure the HandPunch to prepare punch data for time
and attendance software.
Set Serial The Set Serial command allows for the programming of the IP Address,
Gateway Address, and Host Bits (Subnet Mask).
The HandPunch does not have the ability to communicate with a DHCP
server, because of this the IP address needs to be permantly leased
from the DHCP Server.
Port 3001 must be open on all switches and or routers to communicate
between the HandPunch and the Computer.
Input leading zeros for example 001.001.012.012. Once the IP address
is input the screen will change to Gateway Address. If a mistake is
made press the # key to get back to Set Serial and start over.
ENTER