Recognition Systems HandPunch 50E, Руководство пользователя

Страница: 28 / 58

Enter a Command Menu
Page 26
4. Enter the password for the menu you wish to enter. The default
passwords are as follows.
Press for the Service Menu.
Press for the Setup Menu.
Press for the Management Menu.
Press for the Enrollment Menu.
Press for the Security Menu.
5. Press .
6. If you are authorized to use this command the first command option
in the selected menu appears.
7. If you are not authorized to enter this command the display will go
back to the ENTER ID prompt.
Access to the command menus will be granted to all that are enrolled,
until a person(s) is enrolled in the system as a supervisor. If you are
blocked from the supervisory menus, verify your access rights with
management personnel. If enrollment information has been incorrectly
changed and you must have supervisory access to all menus, make
these changes through software.
It is possible to physically reset the HandPunch’s memory, however
resetting memory sets all the HandPunch’s parameters back to the
factory default values. Resetting memory allows access to all menus
everyone until the first person is enrolled (as if it is a new system
installation), but this means that all employee information
programmed into the HandPunch is lost and must be re-entered
manually. Be sure you need to reset memory before performing this
ENTER PASSWORD
1
2
3
4
5
ENTER
ENTER ID
12:00 3/15/05
NOTE
NOTE