Recognition Systems HandPunch 50E, Руководство пользователя

Страница: 34 / 58

Programming the HandPunch
Page 32
Service Menu
The Service menu commands provide information that help you
determine if the HandPunch is performing within normal operating
parameters and identify the status of the unit’s inputs and outputs. The
following section provides a brief summary of the Service Menu
commands.
There are no user serviceable parts inside the HandPunch.
Navigating
the Serice
Command
Menu Enter the appropriate password to enter the Service command menu.
Once you have entered the command menu, there are three options
available for navigating the command menu system.
• Press to enter the command shown on the display.
• Press to step to the next command in the menu.
• Press to exit the command menu (pressing any numeric
key also exits the command menu). If you are in a command’s sub-
menu, press multiple times to completely exit the
command menu.
Service
Commands There are two commands available from the Service command menu.
• Calibrate
• Status Display
Refer to Table 4 and identify the command you need to perform. Step
through all previous commands until you reach the desired command.
NOTE
#
*
CLEAR
CLEAR
Table 4: Service Command Menu
Service Menu
Password = 1
Calibrate
Recal (Y/N)
Status Display
On/Off (Y/N)