Pak-Blast
50 gallon
28
Check cable connections- look for oxidation and clean.
Check fuse. ONLY USE 1.25A time delay fuse.
Disconnect power cable and remove lock
29
with screwdriver.
Remove unit
1
from valve body. Take care with O-ring
28
.
Check the rotation of ball
23
using Ø10 flat screwdriver inserted in
the square of stud
18
. If the rotation is not smooth replace seals
16A, 16B
and ball
23
: instructions follow. After checking rotation
align the notch on stud
18
as illustrated in
fig. i
, right.
If the rotation of ball
23
is smooth, check the motor unit
1
by
connecting the blue and brown wires to a 12Vdc line: correct rota-
tion is 90° between microswitches:
Black cap motor:
with brown wire to (+) pole, gearmotor cam
position is as illustrated in
fig. iii
, right.
Orange cap motor:
with brown wire to (+) pole, gearmotor cam
position is as illustrated in
fig. iv
, right.
If unit
1
does not rotate correctly replace the whole unit.
valve troubleshooting
Valve doesn’t activate.
Repeated fuse blow out.
Replace seals using the repair kit 180.302.31. Fol-
low assembly instructions, right.
Leakage from seals.
180.1910.9HS
/
180.1910.19HS
180.1910.9/180.1910.19
valve repair
9
1
5
14
17
28
15
29
side port
16A
16B
23
24
25
13
22
20
21
19
18
LOCK ONLY USED
WITH ORANGE CAP
MOTOR ASSY
CHEMICAL CONTAINERS INC.
800 346 7867
Содержание Pakblast 50 Gal
