v
Install and secure all guards and shields before starting or operating.
Frequently check fan blades.
They should be free of nicks and cracks. The fan
guard must be kept clean and in good repair.
The mechanical cabinet access guards, fan guard, sag chains, driveline shields, and
gearbox shields should be used and maintained in good working condition. They
should be inspected carefully, at least daily, for missing or broken cable, chain
links, shields, or guards. Missing, broken or worn items must be replaced at once to
reduce the possibility of injury from thrown objects or entanglement.
Check that all fasteners are tight.
Always follow the chemical manufacturer’s instructions for storage, handling, and
application of agricultural chemicals. When handling spray equipment, valves,
nozzles, strainers: wear the safety equipment recommended by the chemical manu-
facturer.
Before a spraying operation is started, rinse out the sprayer; remove and clean all
nozzles, nozzle screens and strainers. Make sure all spray orifices are sized correctly
for your application and not worn. Use strainers and nozzle screens appropriate for
your water source and chemical use.
Check all lines, valves and seals for leaks after filling with water and during calibra-
tion. Replace all weather cracked or worn hoses.
Wear proper protective equipment when adding chemicals to the spray tank. The
area where you are mixing must have adequate ventilation: powders, dust, and
granuals can become airborn when adding to the spray tank; concentrated vapors
can pose health or flammability hazards.
Always follow the chemical manufacturer’s instructions and environmental regula-
tions when disposing of chemical waste and empty chemical containers.
Mix only enough chemical for the particular job. Preventing chemical surplus is the
best way to prevent a disposal problem.
Have a plan for application of end-of-day tank-mix and rinse water. In some cases
small amounts of surplus chemical can be diluted and reapplied to the treated area.
Always follow the manufacturer’s application instructions. Do not exceed the maxi-
mum application rate for which the chemical is labelled.
Sprayer Safety: Pre-operaton
CHEMICAL CONTAINERS INC.
800 346 7867
Содержание Pakblast 50 Gal
