background image

                     

Owner’s Manual 

 

For Kent Kwik & EZ Filler Machine (KT15241) - For use with Kwik & EZ          
AERO-miser™, 32oz. (KT14733).  

 

This Manual Contains Important Safety and Operation Information. 
 
 

               MODEL NO:   S400A KENT  
 
               SERIAL NUMBER:  

 

   
               INVOICE DATE:    

 

KENT AUTOMOTIVE 

8770 W. Bryn Mawr Ave. Suite 900 

Chicago, IL 60631 
1-888-YES-KENT 

www.kent-automotive.com 

The Lawson Family of Businesses 

 

                   This Kwik & EZ Filler machine is set up with special seals.  When used 
with the Kwik & EZ AERO-miser™ with the special filler cap, Part # KT14733, it is 
chemically resistant to almost any product.  ** 
 
                   This unit is set up to dispense products in AERO-miser™ applicators 
which have a 32 oz. capacity.  DO NOT use this machine for any other size 
applicator. 
 
 
                     
** Do not use Steel sprayers with water based materials. 
 
 

IMPORTANT:

  Excessive moisture and debris in your air line can cause damage to 

this piece of equipment and may void your warranty.  A compressed air filter is now 
included and MUST be used to help remove excessive moisture and debris from 
your air line.  This will insure problem free operation of this machine. 

Failure to use this filter will VOID THE WARRANTY. 

 
 
 
 
 
 
 

Summary of Contents for S400A









Reviews: