www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
15
44
-
3060/44
-
3080IM
-
AC
Tighten and torque
the ReadyLIFT
cross members to the frame. Torque
to 150 FT
-
LBS. Do not tighten the
LCA these have bonded bushings
and must be tightened when the ve-
hicle is at ride height.
Install the provided torsion bar
bracket spacer into the torsion bar
pocket on the lower control arm. In-
stall the spacer from the back side of
the LCA and add the collar to the
spacer from the front side of the LCA
Mark the
front
side only of the trans-
mission cross member where the
torsion bars pass through. Mark at
the 1 o'clock position and 5 o
’
clock
position draw a
1/4”
thick clearance
line between these marks.
Using a suitable cutting tool, cut
along the previous made marks. Re-
move and discard the outer portion
of the cross member. Paint the ex-
posed metal with a quality rust pre-
ventative paint.
