www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
12
44
-
3060/44
-
3080IM
-
AC
Support the differential with a suita-
ble jack / stands, remove the driver
and passenger side hardware. Mark
the hardware locations as the bolts
must be reinstalled in specific spots.
Carefully lower the differential out of
the vehicle and set aside.
Mark the front drive shaft to pinion
orientation for reinstallation later.
Remove the front drive shaft from
the differential. Let hang out of the
way.
Clean the driver side rear control
arm pocket. Measure from the center
of the control arm mounting bolt
hole to the inside of the frame pock-
et
1.25”
, mark a line vertically across
the back and front side of the pock-
et. Connect the two lines across the
top of the pocket.
Using a suitable cutting tool, cut
along the previous made marks. Re-
move and discard the outer portion
of the control arm pocket. Paint the
exposed metal with a quality rust
preventative paint.
1.25”
