APOLLO FYM - SPREADER CONTROLLER
6
1
User Options
Configure basic instrument options.
1.1
Set Time and Date
If you need to change the time or date setting, position the cursor against the relevant line, key-in the new
value and press .
1.2
Adjust Screen Contrast and Brightness
Figure 19
The screen may go darker at very high or very low temperatures. For example, on a very cold morning it may
take a short period of time for the display to gain normal contrast as the instrument warms up. This is a normal
characteristic of this type of display and does not mean the display is faulty.
If by accident the contrast setting is adjusted so that the screen graphics can no longer be viewed (i.e.
completely light or dark), don't panic! - you can navigate directly to the "DISPLAY" screen by pressing and
holding the key for at least 10 seconds. The instrument will bleep at 2-second intervals as long as the key
is depressed. You can then adjust the display using the arrow keys.
1.3
Customise
Information can be displayed in Metric or Imperial units by selecting the desired option via the SETUP menu.
Function
Units
Metric
UK Imperial
Forward Speed
km/hr
miles/h
Application rate
lg/ha
tonnes/ha
lbs/acre
tons/acre
Part/Total Area
hectares
acres
Tank volume/ Part/Total
volume applied
Tones
lbs
1.
Time/Date
4.
User Options
2.
Contrast
Brightness
UK572-16.PCX
3.
Customise
4.
User Options
4.
User Options
UK572-16.PCX
