RCA RCU1010, Руководство пользователя

Страница: 3 / 40

3
Congratulations on your purchase of the RCU1010. This unit is one of the most sophisticated, yet
easy to use, remote controls available today. With the RCU1010, juggling multiple remote controls is
a thing of the past! This one unit controls up to nine components, including the most popular brands
of TV, VCR, DVD, PVR, SAT/CBL, CD and AUDIO equipment. The RCU1010 has the ability to learn
commands from your existing remotes, and the Smart Macro feature allows multiple commands to
be executed with a single keypress. The RCU1010 is easy to use, easy to program, and it gives you
total control—at the touch of your fingertips!
Universal Learning Remote
with Touchscreen
Battery Information
Your RCU1010 Universal Learning Remote with Touchscreen requires four AAA alkaline batteries
(sold separately).
Battery Installation
To install the batteries:
1. Turn the unit over, push on the tab and slide the cover down.
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery case.
3. Slide the battery cover back into place.
Battery Saver
Your RCU1010 saves battery power by automatically turning off if any key is pressed for more
than 30 seconds. This saves your batteries should your remote get stuck in a place where the keys
remain depressed, such as under a book or between the sofa cushions.
Code Saver
With the RCU1010, you don’t have to worry about losing programmed information when
you change batteries. All programmed parameters are retained indefinitely in the event of
battery replacement.
Power-on Default
When you replace batteries, your RCU1010 remote always powers on in the TV Mode. If your
TV, VCR or satellite receiver are RCA, PROSCAN or GE brands, you may not even need to set
up the RCU1010 to control them. In these instances, the remote should work as soon as the
batteries are installed.