manualshive.com logo in svg

RCA RCU1010, Руководство пользователя

Поделиться
Скачать
RCA RCU1010 Скачать руководство пользователя страница 29

29

LIQUID CRYSTAL DISPLAY
The Liquid Crystal Display (LCD) acts as the “virtual keypad” on the remote. The touchscreen is
normally blank when the remote is not in use. Pressing the 

SETUP 

or 

BACKLIGHT

key, or touching

anywhere on the LCD, turns the display on. The remaining rubber keys do not activate the display.

NOTE:

Please use only your finger to touch the LCD screen. Sharp objects may cause scratches or cracks.

Glossary Of Terms

MENU KEY
The LCD 

MENU

key brings up the Main Menu. If you are already in the menu system, press and

release the LCD 

OK

or 

MENU

keys to select a highlighted choice. Use the LCD NAVIGATION keys

(

UP

, 

DOWN

, 

LEFT

, and 

RIGHT ARROW

keys) to move through the menu selections.

NOTE: 

With some brands, the 

CH+

and 

CH-

and 

VOL+

and 

VOL-

keys on the rubber keypad navigate

through the highlighted choices. Once you select a component key on the LCD touchscreen (

TV

, 

VCR

,

DVD

, etc.), you put the remote in that mode, and it remains in that mode until you press and release

another mode key.  When you put the remote in a specific mode, the control screen for that mode is
shown on the touchscreen.  For example, if you put the remote in TV Mode, the screen you see on the
touchscreen is the TV Mode control screen.

MUTE KEY
The 

MUTE

key on the rubber keypad mutes the volume on your component with volume control.

NAVIGATION KEYS & SELECT KEY
Use the LCD NAVIGATION keys (

UP

, 

DOWN

, 

LEFT

and 

RIGHT ARROW

keys) to move the through

on-screen menu and guides. The NAVIGATION keys may also be used to move through the
highlighted choices. The LCD 

SELECT

key chooses the highlighted choice.

NOTE: 

With some manufactured models, the LCD 

MENU

or 

ENTER

key is used to select the

highlighted choices.

PIP & SWAP KEYS
The LCD Picture-in-Picture (

PIP

) and 

SWAP

keys operate your TV’s Picture-in-Picture, if equipped

with this feature.

PUNCH-THROUGH
A Punch-through command has the ability to punch through from one component to another (e.g.,
pressing the TV 

VOL+/VOL-

keys can work while the remote is in the VCR Mode).

REVERSE, STOP, PLAY, PAUSE, FORWARD KEYS
These rubber keys operate the same as your existing remotes.

SETUP KEY
The 

SETUP

key on the rubber keypad is used to walk you through the steps in setting up the remote.

Setup is used for Code List Entry, Code Search, Code Identification and other functions. During a Setup
function, if no button is pressed for 60 seconds, the remote automatically exits from the Setup routine.

SLEEP KEY
The LCD 

SLEEP

key allows you to turn your TV off automatically, if your TV is equipped with this

feature.

SMARTMACRO
When programmed, the SmartMacro function causes a series of events to occur in sequential order.
Once programmed, pressing the LCD 

MACRO

key activates a screen that allows you to select any of

your programmed Macros. An example of a Macro sequence could be “Turn on the TV; then set it to
channel 3; then turn on the satellite receiver; then set it to channel 57.” You can program and store
nine SmartMacros, each consisting of up to 20 commands.

TIMER
This feature allows an event to happen at a later time on the current day, such as “Turn the TV on 
at 7:00 PM.” The Timer Mode allows you to set up to four individual commands and must be
reprogrammed after each event occurs.

TV•VCR KEY
The LCD 

TV•VCR

key operates the same as the 

TV/VCR

or antenna keys on your original remotes.

VOLUME AND CHANNEL KEYS
The 

VOLUME 

and 

CHANNEL

keys (V

OL+/VOL-

, 

CH+

, and

CH-

keys) on the rubber keypad increase

and decrease the volume level and channel numbers.

NOTE:

With some brands, these keys also navigate through the highlighted choices in the menu options.

Содержание RCU1010









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды