manualshive.com logo in svg

RCA RCU1010, Руководство пользователя

Поделиться
Скачать
RCA RCU1010 Скачать руководство пользователя страница 9

9

Your RCU1010 has the ability to automatically scroll through the entire Code Lists by using 
the Autosearch feature. 

To start a Code Autosearch, follow these steps:

7. The current code being sent is displayed in the upper 

right-hand corner. 

Note:

The Code Search starts from the currently stored code

under that mode. For example, if the component Code List
contains 100 codes and the currently stored code is 050, the
Code Search starts from 051 and continues to 100 before
looping back to 000 and finishing at 050. This speeds up the
process of finding the correct code for your component, since
you may discover that some codes can turn your component
on and off but are not able to control its other functions. This
process allows you to bypass codes you’ve already tried.

8. If your component responds and you accidentally overshoot

that code by pressing the 

ON•OFF

key again, press and

release the 

CH-

key or LCD 

DOWN ARROW

key to backtrack

through the Code List. You can change the direction to
forward once again by pressing the 

ON•OFF

, 

CH+

, or LCD

UP ARROW

keys.

9. After pressing the LCD 

OK

key in step six, the LCD displays

the Code Search Mode? Screen. The Code Search Method
entry is now complete. To exit the Setup Mode, press and
release the LCD 

EXIT

key, followed by the LCD 

OK

key on

the Exit Setup Screen.

Code Autosearch

1. Manually turn on the component to be controlled (TV, VCR,

DVD, etc.).

2. Press and hold the 

SETUP

key on the rubber keypad for 2-3

seconds until the LED indicator light remains on and the
touchscreen shows the Code Setup Mode? Screen. 

3. Release the 

SETUP

key.

4. Press and release the 

SETUP

key again. The LCD displays 

the Code Search Mode? Screen.

5. Press and release the desired component key (

TV

, 

VCR

, 

SAT

,

etc.). For 

AUX

, press and release the LCD 

AUX

key followed by

the desired component key to be programmed under that key.

Note:

The 

AUX

key automatically defaults to CABLE unless

another selection is made.

6. The LCD displays the Code Search Key? Screen. Press and

release the 

ON•OFF

key once. If you do not press any other

keys, the Autosearch feature automatically starts in six seconds.

7. The Autosearch sends the next code in the list every three

seconds. The current code being sent is displayed in the
upper right-hand corner.

Note:

The Autosearch can take a significant amount of time,

since there are many codes in the list.

8. To speed up the Autosearch, you can manually override the

process and temporarily speed it up by pressing the normal
search keys (

CH+

, 

CH-

, 

ON•OFF

, LCD 

UP

and 

DOWN

ARROW

) in both forward and reverse directions.

Содержание RCU1010









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды