RCA MRP1150, Руководство пользователя

Страница: 61 / 72

Chapter 6 59
Other Information
No sound while playing a DVD • The DTS option is selected but your receiver has no
DTS decoder, or you don’t have a receiver
connected.
Subtitle and/or audio • If the subtitle and/or audio language does
language is not the one not exist on the disc, the initial settings will not be
selected from the initial seen/heard. The disc’s priority language is selected
setting instead. Set the subtitle and or audio language
initial setting manually.
No on-screen display • The Off setting is selected for OSD Display; select
On in the setup menu.
The menu is displayed in a • The Menu Language preference is set to that
Foreign language language. With no disc playing, press the MENU
button on the remote. From the main menu, press 3
to access the PLAYER MENU LANGUAGE screen.
Play doesn’t begin when • The rating level has been set and the disc is subject
a title is selected to that restriction.
No forward or reverse scan • Some DVDs have sections that prohibit rapid
scanning, or title and chapter skip.
Disc won’t play • Both the player and the DVD is coded by region. If
the regional codes don’t match, the disc cannot be
played. This player is Region No. 4. Check the disc
code.
• Verify that the disc is a type that this player can read.
• Clean the disc.
• Try another disc to see if the disc that won’t play is
bad.
Desired angle cannot • Some DVDs do not have the multi-camera angle
be changed system, and some discs have it only on certain
portions.
Picture is not displayed • Make sure the TV SCREEN feature in the setup
menu is set with correct aspect ratio for your
television.
• Make sure the VIDEO OUTPUT switch on the back
of your DVD player is set to the type of output you
are using – YPbPr for Composite Video or S-VIDEO
for an S-Video connection.
Troubleshooting
Common Problem Solution