RCA MRP1150, Руководство пользователя

Страница: 60 / 72

58 Chapter 6
Other Information
Common Problem Solution
No Power Insert the power cord’s plug securely into the outlet.
Power turns itself off The power is automatically turned off after approx 30
minutes have elapsed in the stop mode (auto power-off
feature). Turn power back on.
Player fails to start, even • Ensure that the disc is installed with the label side
when PLAY is pressed facing up.
Play commences but then • This player plays only DVD discs, Audio CDs and
stops immediately Video CDs.
• The disc is dirty. Clean it.
• Condensation has formed. Allow player to dry out.
No picture • Ensure that the equipment is connected properly.
• Turn on the TV’s power.
• Ensure that the input setting for the TV is correct.
Picture is distorted during • It is normal for some distortion to appear while
forward and reverse scan scanning.
No sound or distorted sound • Ensure that the equipment is connected properly.
• Ensure that the input settings and the volume
adjustment for the TV and/or receiver are correct.
• No sound is heard during still, frame advance, or slow-
motion play.
No operations can be • The batteries in the remote may need replacing.
performed with remote • Operate the remote control closer to the DVD player.
• Remove any obstacles between the remote and the
DVD player or other component.
• Remove batteries and hold down one or more buttons
for 60 seconds to drain the microprocessor inside the
remote to reset it. Reinstall batteries and try remote
again. You may need to reprogram it.
The icon appears on screen • The feature or action cannot be completed at this
time because:
1. The DVD’s software restricts it.
2. The DVD software doesn’t support the feature
(e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or
search time that is out of range.
Troubleshooting