Using the Remote
19
Arrows
Use the navigation arrows to move the on-screen highlight
up, down, left, or right. Using the arrows to highlight a menu item is
also called “pointing.”
OK
Selects a highlighted choice if you are in the menu system. After
entering a one, two, or three-digit DIRECTV channel number, press to
tune to the channel. If you are entering a number other than a DIRECTV
channel number (for instance, to tune your VCR to a channel), you do
not need to press this button.
MENU
Displays the Main menu. If you are already in the menu system,
press OK or MENU to select a highlighted choice. When you are using
the remote control to operate an RCA, GE, or PROSCAN VCR (the remote
is in VCR mode), the MENU button functions as a PROGRAM button.
CLEAR
Removes the on-screen displays and returns you to normal
viewing.
Digit Buttons (0 - 9)
Use the digit buttons to tune directly to a four
digit DIRECTV channel or non-DIRECTV channel. If a DIRECTV channel
number is less than four digits long, you must press OK after entering
the channel number. If you are in the menu system, use the digits to
highlight and select items (use 0 to return to the previous menu screen).
WHO•INPUT
Press the WHO button one or more times to scroll
through the user profiles. When you are using the remote control to
operate an RCA, GE, or PROSCAN TV (in TV mode), press the
WHO•INPUT button one or more times to scroll through the avalilable
video input sources.
ANTENNA
In TV mode, lets you switch the source of the video signal
from satellite signals to an off-air antenna or cable signal when using
the OUT TO TV jack. In VCR mode, functions as a TV/VCR input button.
Transport Buttons (REVERSE, PLAY, FORWARD, RECORD, STOP,
PAUSE)
When programmed, these buttons are used to control an
auxiliary device, such as a VCR or laserdisc player. Note that if your VCR
Controller is connected, the RECORD button can be used to schedule a
timer recording when using the Program Guide or to begin recording
while watching a program (in VCR mode).
