Raytheon Anschütz SYNAPSIS ECDIS, Руководство оператора

Страница: 243 / 434

Operator Manual
8--32
4343DOC020102 Edition: November 2019
Procedure: (Figure: 8--22)
Step 1 Select Automatic Route Planning/Port Information from the Nav
Tools menu. The dialog box appears.
Step 2 Select the desired start port in the list /alternative press Click Cursor .
Position the cursor on the port name /alternative on the chart position.
Then press the
Add Port button /alternative press left trackball key.
For further port details.
Position the cursor on the port name and press the right trackball
key, a port information window appears (Figure: 8--22).
Center the chart
Position the cursor on the port name and press the left trackball
key twice. This will center the chart on the corresponding port.
Step 3 Select the desired destination port (as Step 2 describes).
Step 4 Select whether Inshore Traffic Zones and Rivers shall be considered
for route planning.
Step 5 Adjust the Draft , the default turning Radius , the desired speed and
the XTD limit .
Step 6 Special application buttons.
The button
Reverse provides the possibility to swap the start and end
destination.
The
Remove --button’s is to remove the start or destination port in
the dialog box for a new entry.
Select the desired start or destination port in the dialog box and press
the
Remove button.
Step 7 Press the Calculate button, a route description displays in the dialog
window from the dialog box.
If there is already a secondary route, a confirmation prompt for
clearing the existing secondary route will be displayed. If the existing
secondary route has not been saved, you get the choice to save the
route now.