www.rayteccctv.com
4
Raytec Global Tel: +44 (0) 1670 520055
Raytec Americas Tel: +1 613 270 9990
Hard Reset
– On the Lamp
There is a hard reset button on the lamp which can be used to reset the lamp in case all
connectivity is lost.
Turn the power to the lamp OFF, remove the baseplate and access the button as shown.
Press and hold the Reset button and reconnect power. Keep the Reset button pressed for
about 5 seconds until the lamp flashes. Release the Reset button. Ensure the baseplate is
securely re-attached to maintain waterproof integrity of the product.
All settings will be lost and the factory default settings will be restored.
WARNING:
We recommend attempting to reconnect with the lamp by firstly restarting the
lamp or restoring factory settings via the integrated web interface. The hard reset button on
the lamp should be used only as a last resort to restore connection to the lamp.
Hard Reset Button
