www.rayteccctv.com
28
Raytec Global Tel: +44 (0) 1670 520055
Raytec Americas Tel: +1 613 270 9990
DIAGNOSTICS
This page is useful for first level troubleshooting and displays basic diagnostics and
information of the lamp as follows:
Input Voltage Status
green/red LED indicates if Input Voltage correctly within specified range
LED Status
green/red LED indicates if all LED strings of lamp operating correctly
Photocell Status
indicates if photocell status is day or night
Ext Input Stat
indicates if an external input is being received (Active) or not (Inactive)
Auxiliary Output Status indicates if external output is active (closed) or not (open)
Deterrent Pattern
indicates which deterrent pattern is selected
Duration
– Lamp On
indicates the amount of time the lamp has been on
Duration-
Power connected indicates the amount of time the lamp has been connected to power source
Note information on this page is not refreshed automatically and requires the page to be
reloaded or refreshed by pressing function key F5 or pressing the refresh on your web
browser or simply selecting the page again from the navigation bars on the left.
The LED status indicators are latched indicators, this means that an LED fault will be shown
when a fault is detected and remain lit. This will occur if the input voltage is outside the
required/specified range or there is an open circuit or short circuit LED fault detected
If these faults are cleared the LED indicators will remain red until the system is rebooted
from the System Information screen. The LEDs will turn Green, but if the faults persist the
LEDs will turn Red.
