www.rayteccctv.com
20
Raytec Global Tel: +44 (0) 1670 520055
Raytec Americas Tel: +1 613 270 9990
1. Yes, Send & Receive
The lamp will both originate group
commands based on the trigger AND
respond to group commands from other
lamps in its group
2. Yes, Receive only
The lamp will only respond to group
commands from other lamps in its group but
it will NOT originate any group commands
Factory Defaults:
Photocell
No, ignore group commands
External Input
No, ignore group commands
Lamp Mode on Trigger
This will dictates the status of the lamp on receipt of a valid instruction from Photocell and/or
External Input. For both the Photocell and the External Input, the lamp can either be
programmed to stay off or to turn on.
In addition, the External Input can activate the Deter mode
– which can be configured below.
Factory Defaults:
Photocell
On
External Input
On
Power
This will dictate the power the lamp turns on at in response to a valid instruction. Power
levels can be set from 20% min to 100% max by using the slider bar.
Factory Defaults:
Photocell
100%
External Input
100%
Duration
This will dictate the amount of time the lamp turns on (if on command is selected) from
receipt of a valid instruction.
