Raytec vario2ip HYBRID, Инструкция по установке и настройке

Страница: 6 / 20

6
STEP 4: Change IP address and connect to the illuminator (Pg. 11)
All Vario2 IPPOE Hybrids have the same default IP address and this must be changed
immediately to avoid any potential conflicts or communication errors.
We recommend the easiest and fastest way to identify and connect to illuminators is using the
Raytec Discovery Tool where the IP address can be altered or DHCP enabled.
Alternatively, type the IP address of illuminator into a web browser – default is 192.168.2.80 –
and use the web interface to manually alter IP address.
IMPORTANT:
We recommend Raytec Discovery Tool as the easiest way to establish communication. If using IP
address for direct communication, illuminator and computer must be in same network range.
STEP 5: Illuminator Set-Up (Pg. 12-18)
Raytec Discovery Tool Basics
Log-in, Security & Basic Illuminator Setup
Basic Web Page Functionality
STEP 6: Basic Troubleshoot (Pg. 19)