Raytec vario2ip HYBRID, Инструкция по установке и настройке

Страница: 8 / 20

8
PoE Detection – Resistance Selection Switch
There is a switch on the VAR2-IPPOE-hy8-1 and hy8-1-C illuminators which can be used to
change the PoE detection resistance of the illuminator (24.9K
Ω
is the factory default setting).
Turn the power to the illuminator OFF, remove the baseplate and access the switch as shown.
The majority of PSE equipment requires a detection resistance of 24.9K
Ω
to establish a PoE
link. Some models of PSE equipment require a 12.5K
Ω
detection resistance. Check with your
supplier of PSE equipment.
For 24.9 K
Ω
, slide switch to the LEFT (factory default – as shown). For 12.5 K
Ω
, slide switch to
the RIGHT.
Detection Resistance Selection Switch