Raytec vario2ip HYBRID, Инструкция по установке и настройке

Страница: 17 / 20

17
Page Name Functions available
Home Page Allows manual control of an individual illuminator or group of
illuminators including power adjustment, wavelength choice and
deterrent controls. Select override to operate above functions.
Settings / Groups Allows detailed set-up and configuration of the illuminator
including how it responds to Photocell and External Inputs, light
type, duration on period, power levels, soft start, response to
group commands, deterrent patterns and speeds. Allows
illuminators to be allocated to a group or to create a new group.
Selectable control of illuminator either locally, by VMS or HTTP
commands.
Adv. Settings Allows for further detailed setup of External Input, External
Output, Photocell sensitivity level and duration of Override.
Access Change passwords
Network Allocate IP address and other network settings, select DHCP
operation, allocate illuminator name
System Information Indicates basic information about the illuminator. Ability to
restore factory settings or restart illuminator.
Diagnostics Basic diagnostics to enable 1
st
level troubleshooting
Adv. Diagnostics Advanced diagnostics to enable 2 nd level troubleshooting
Software Update Indicates current software / firmware version. Ability to upload
updated software / firmware version.
Log Off We recommend logging off illuminator after every session