4.1 Maintenance
Warning: Switch off power
Before commencing any maintenance task, switch off
all power to the product.
Maintenance procedures
Although your Raymarine Satellite TV system require minimal
maintenance, ensure that your system maintains peak performance
by carrying out the following maintenance tasks on a routine basis:
• Examine cables for signs of damage such as chafing or cuts.
• Check that all cables are securely connected.
• Wash the exterior of the antenna cover with fresh water to remove
salt deposits; a mild detergent may be added to remove grime.
– DO NOT use abrasive cleaners or solvents such as acetone as
this may result in irreparable damage to the unit.
– The antenna is not a sealed unit, so DO NOT use a power
spray to wash the exterior as this may result in water ingress
and damage to the unit.
• Twice a year remove the antenna dome and examine the antenna
assembly for signs of corrosion.
4.2 Troubleshooting
Your Raymarine product has been subjected to comprehensive test
and quality assurance programs prior to packing and shipping.
However, should the product develop a fault, refer to the following
table and list (below) to identify a possible cause and corrective
action to help restore normal operation.
If you still have a problem after referring to the table, contact your
local Raymarine dealer, national distributor or Raymarine Product
Support for further advice.
Possible cause
Symptom
1
2
3
4
5
6
7
8
Antenna not functioning
X
X
Display shows ‘ANT OUT
OF CONTROL’ message
X
X
No picture on TV
X
X
X
X
Intermittent picture for
short intervals
X
X
X
X
X
X
System works at the dock
but not under way
X
System will not find
satellite
X
X
X
X
X
X
X
‘Snowy’ television picture
X
1. Blown fuse, low power or wiring. Check that:
• The in-line quick blow fuse (if fitted) has not blown, or the circuit
breaker has not tripped. If the fuse has blown, replace it with
one of the same type and rating.
• There are no damaged wires and/or insecure connections.
42
STV Gen2 installation and operation
