•
AUTO
– Auto-skew is enabled, you cannot manually adjust
the skew position.
•
MANUAL
– Auto-skew is disabled, you can proceed and set
a skew position.
3. For manual mode adjustment, use the
+1
and
-1
softkeys to
select the required value, then press
SET
when complete.
3.8 Graphical User Interface
Graphical User Interface (GUI) software is provided on the CDROM
supplied with your system components. When installed on a
Personal Computer (PC) it enables you to operate your antenna
system from the computer. To do this, the ACU must be connected
to the serial port of the computer, using the 1.8 m PC cable supplied.
ANT RF1
FUSE
DC 9 to 30V
NMEA
PC INTERFACE
RECEIVER
-
+
-
+
M
ADE IN KOREA
D11565-3
You can use the GUI for the majority of operating and setup
functions.
40
STV Gen2 installation and operation
