Raymarine ST5000+, Руководство пользователя

Страница: 21 / 108

Chapter 2: Basic Operation
9
2.4 Display and keypad illumination
Press
disp
for 1 second, from any mode, to enter illumination
adjustment mode and turn the lights on.
1
Subsequent presses of the
disp
key cycles the possible illumination
settings:
L3, L2, L1, OFF, L1, L2, L3
etc. where
L3
is the brightest setting.
The display times out to normal operation after 7 seconds of keypad
inactivity.
Pressing any other key before the 7 second time-out will select the
mode assigned to that key (for example,
auto
selects Auto mode,
standby
selects Standby mode).
Note: If other SeaTalk instruments or autopilot control units are
connected to SeaTalk, the illumination can be adjusted from these
units.
Any adjustments to the illumination are lost when the unit is
switched off.
The keys are still lit at a courtesy level when the display lighting is off.
2.5 Data pages
The
disp
key is used to cycle “pages” of SeaTalk or NMEA data.
Once a Data Page is selected, this page becomes the principle autopilot
display. The autopilot mode displays (Standby, Auto, Track and Vane)
132_4c02.p65 14/06/99, 10:33 9