Raymarine ST5000+, Руководство пользователя

Страница: 68 / 108

56
ST5000 Plus Sterndrive & Hydraulic Autopilots Owner’s Handbook
Mounting in a restricted area
If an obstruction prevents installation of the drive unit as supplied, the
main body can be rotated relative to the mounting bracket as follows:
Front Cover Lock Nut
Fixing Screw
D409-1
1. Remove the two fixing screws.
2. Carefully slide the cover forwards – don’t pull the four cables out
of the plug located inside the cover.
3. Slacken the lock nut.
4. Rotate the main body as required.
5. Tighten the lock nut securely – make sure that the lock nut is not
more than one turn from the start of the thread.
6. Replace the cover – make sure you don’t trap any cables.
7. Use the steering wheel to move from hard over to hard over –
make sure that no part of the drive unit touches any part of the
vessel or vessel fittings.
132_4c05.p65 14/06/99, 10:34 56